The days of manually filling and replacing ice trays are long gone.
The annoyance of an ice maker that struggles to keep up, or fails entirely, can disrupt the family’s daily routine.
Refrigerator ice maker issues are frequently traced back to a few key components, such as water valves and lines, the water filter, the ice maker control arm, compartment temperatures, the ice bin, and others.
This article explores the ice maker guide to discover about some of the most common causes of an ice maker that isn’t working properly, and to help to find remedies that will resolve the issue.
Causes of Whirlpool wrx735sdbm02 Ice Maker Not Working
Different sources of improper working of ice maker are discussed as follow:
Water filter clogged
It can be seen that the filter works hard to eliminate impurities in the water.
However, it can become clogged over time due to the particles it traps.
A clogged filter might provide less water to the ice maker, causing ice production to diminish or stop.
A blocked or improperly placed water filter will limit the flow of water to the ice maker, perhaps resulting in thin, low, or no ice output.
Hence, this is one of the potential causes of inefficient working of ice maker.
Water inlet valve
If the water filter is working properly, then the water inlet valve for the ice maker could be the source of the problem.
Therefore, investigation of water inlet valve is necessary.
The water inlet valve opens and closes in response to water pressure to provide water to the ice maker.
A valve with a pressure of less than 20 psi (pounds per square inch) will not be powerful enough to feed enough water into the ice maker.
This will stop the ice maker to work properly. Hence, this issue cannot be overlooked.
Too warm Refrigerator/ Freezer
The next step is to analyze the refrigerator and freezer compartment.
It is quite possible that when the refrigerator or freezer temperatures are set too high, the ice maker may not be able to keep up with the desired pace of ice production, resulting in delayed ice production, cubes that are too small, or no ice production at all.
Hence the ice maker fails to work smoothly. Thus, this issue must be tackled.
Control Arm
The next step is to check the control arm.
The ice maker’s control arm is a long plastic or metal handle that stands on the side or top of the ice bin and is responsible for monitoring ice levels in the bin and suspending ice production when the bin is full on certain models.
If the control arm becomes loosened, breaks, or is accidentally placed into the off position, ice production may be terminated.
Therefore, the mispositioning of control arm cause hurdles for efficient working of ice maker.
Water inlet tube
It has been observed that water inlet tube disrupts the normal functionality of ice maker.
When the temperature in the freezer or refrigerator compartment is set too low, or the insulation surrounding the water line isn’t helping to avoid freezing, it may end up with a frozen water line.
Once when the water inlet valve is frozen, it will create hurdles for ice maker.
Therefore, the factor of water inlet valve must be considered.
Water Supply
Another reason can be the water supply.
There are strong chances that the icemaker may not be getting enough water.
Therefore, the water supply issue needs to be investigated.
It must be noticed that the water supply line must be free of kinks.
Since water flow can be reduced by a kink in the line therefore disrupt the water supply.
Whirlpool wrx735sdbm02 Ice Maker Not Working? -Solutions
The potential solutions in case of ice maker would stop working are explained as follows:
Clean up the water filter
Replace the water filter in the refrigerator once every six months, and keep an eye out for indicators of an old filter.
Odd-tasting ice or water, slowly dispensed water, black flecks in water or ice, and, of course, restricted to no ice production are other signs.
Therefore, it is essential to clean the water filter periodically to avoid the consequences later.
Water inlet valve
Water inlet valve must be working smoothly.
First, the water pressures supplying the valve must be examined by using the equipment.
This can be done by the person manually.
However, the assistance of a professional can be taken in case issue become severe.
The pressure level must be checked.
If the pressure is sufficient at 20 psi or more, one may need to replace the water entry valve to ensure the smooth workflow of icemaker.
Check refrigerator/freezer Temperature
As it is discussed above that excessive warmth in refrigerator/freezer compartment can stop the working of ice maker.
Therefore, to make sure that ice maker is working fine it is necessary to check the refrigerator as well as freezer temperature.
Check the refrigerator and freezer temperatures, ensuring that the freezer is set to 0°F (-18°C) and the refrigerator temperature is between 33 and 40°F (0-4°C).
These set temperatures will keep running the working of refrigerator in a smooth manner.
Control arm
The next step is to explore the control arm whether the issue exists here or not.
To resolve the issue of control arm, check the control arm to make sure that it is in the “on” position.
Then, ensure that arm must be tightened.
So, tighten the arm if it appears to be loose.
However, if it appears to be fractured then it is essential to seek professional assistance.
After technician help, the issue of control arm must be resolved.
Water inlet tube
The next step is to ensure that water inlet tube must not be frozen.
Because the water line is positioned behind the ice maker, accessing it usually necessitates entirely removing the ice bin and maker.
Using warm water or air one can unfreeze the waterline at home.
However, there is always a risk of any mishap while handling the tool without having much expertise.
Therefore, it’s best to leave it to a professional who has special tools to help with the job.
Help from technician will resolve the issue in an effective way.
Water Supply
When inspecting the water supply line, make sure it is correctly linked to a cold water source and that the water shutdown valve is fully open.
Next, ensure that there are no kinks in the water supply line.
Water flow can be reduced by a kink in the line.
Straighten the water supply line to restore proper flow and pressure.
Avoid pushing the refrigerator too far back against the wall or cabinet to prevent the possibility of a pinched water line.
How To Reset Whirlpool wrx735sdbm02 Ice Maker?
Different ways of resetting Whirlpool wrx735sdbm02 are discussed below:
Reset Button
To reset Whirlpool wrx735sdbm02, the first step is to press the restart button.
The ice maker should have a reset button depending on the model of the refrigerator.
All one need to do is find and press the button.
When one clicks the button, the ice maker unit will be completely reset and should resume normal operation.
For resetting, look for the reset button.
The reset button is normally positioned at the bottom of the ice maker unit or, in some circumstances, at the top or bottom of the ice tray.
Hold down the button for a few seconds until a beep is heard.
Let release of the button when hear the beep sound.
Check to see if the problem has been resolved after the reset.
Feeler arm
Adjusting the feeler arm is another option to reset the Whirlpool ice maker.
The feeler arm is a sensor located within the ice maker that monitors how much ice the ice maker produces.
When it determines that the ice tray is full, it instructs the control board to stop producing ice.
The feeler arm can become caught and cease operating correctly at times, so loosen it before it can start working again.
Turn on/off the ice maker
The next step is to on/off the icemaker.
Find the on/off switch. One should be able to locate it beneath the ice tray.
Once found, remove the ice tray and, if applicable, the lid plate.
Turn off the light.
Wait a few moments before turning it back on.
After turned it back on, replace the ice tray and lid in your ice maker.
Power cycle
If the first three solutions failed to reset your ice machine and get it running again, then the final choice is to unplug the refrigerator and reset the entire device.
Unplug the refrigerator and wait around 10 minutes before plugging it back into the power outlet.
Sources:
https://www.whirlpool.com/blog/kitchen/ice-maker-troubleshooting.html
https://www.ifixit.com/Answers/View/573381/Ice+maker+not+working
Related Articles: