A whirlpool refrigerator water filter purifies tap water by capturing and neutralizing pollutants before it enters the refrigerator dispenser and ice maker.
By absorbing contaminants, the porous substance of the activated carbon in the filter decreases impurities.
Refrigerator water filters are one of the most cost-effective solutions to provide clean water.
The water filter, which is commonly housed inside refrigerator, traps and absorbs impurities and pollutants in tap water using a coconut shell activated carbon filter.
This produces clean water for drinking and cooking.
The most crucial feature of the whirlpool refrigerator water filter is its door; if it is broken, the refrigerator will not function properly.
This article will explain briefly the primary causes and solutions for the broken water filter door.
Reasons Behind Water Filter Door Broken
Different potential causes of water filter door broken are explained as follows:
Inappropriate Installation
Depending on the model, the location of the water filter in a Whirlpool refrigerator will differ.
Some refrigerators have the filter inside, in the upper right corner, while others have it at the front grille.
The most important thing is to properly install the water filter unit so that it functions effectively.
If it is not properly installed, it may result in a broken door, which will have an influence on filtering.
As a result, it is critical that it be properly inserted.
This might happen if a filter is destroyed or improperly placed.
If it is not installed in a proper way, it will start disturbing the working of refrigerator as it will produce noise.
It will create disturbance and disrupt the refrigerator operations.
High water Pressure
The force conveyed by water can only increase if water pressure is too high.
So, if the water filter is not properly positioned or just not designed to withstand such forces (which the most of them aren’t), it will burst, causing the door of the whirlpool refrigerator to break and, at best, leaving a flooded kitchen floor.
Clogged water filter
It can be seen that the filter works hard to remove contaminants from the water.
However, because of the particles it catches, it might become clogged over time.
A clogged filter may cause harm to the door, causing door to be broken.
A clogged or incorrectly installed water filter will restrict the flow of water resulting in irregular output which may break the door indirectly.
As a result, this is one of the possible causes of the broken door of water filter.
Improper placement of meal
There is a possibility that things will become entangled in the water filter.
During operation, various things may fall within the water filter, causing a blockage.
As a result, interrupt the functionality and begin creating pressure on filter thus cause breakage of water filter door.
Certain leftovers may clog the water filter’s path, resulting in an excessive pressure that will cause harm to the door.
Therefore, this is one of the possible explanations.
Poor icemaker functionality
If the water filter is working properly, the ice maker’s water inlet valve could be the source of the problem.
As a result, the water entry valve must be investigated.
To supply water to the ice maker, the water input valve opens and closes in reaction to water pressure.
A valve with less than 20 psi (pounds per square inch) of pressure will not be able to feed enough water into the ice maker.
This will prevent the ice maker from working properly.
This will create hurdles for water filter to perform smooth functions.
Hence, as a result, this issue cannot be neglected.
Miscellaneous Issues
Other than these, all the components related to water filter and its functionality need to be investigated.
There are potential chances that some other component might causing disturbance in the different parts of refrigerator which in turn disrupt the working of water filter as well.
All the parts need to be check in case of this issue.
Solutions to Avoid Water Filter Door to be Broken
Clean up the water filter
Replace the water filter in the refrigerator every six months, and look for signs of an outdated filter.
Other indicators include strange-tasting ice or water, slowly dispensed water, black specks in water or ice, and, of course, a restriction on ice production.
As a result, it is critical to clean the water filter on a regular basis to avoid the effects later.
Water inlet valve
The water intake valve must be in good functioning order.
First, the water pressures supplying the valve must be tested using the equipment.
This can be done manually by the person.
However, if the problem becomes too severe, a specialist can be consulted.
The pressure level must be monitored.
If the pressure is sufficient at 20 psi or more, the water entrance valve may need to be replaced to ensure the smooth operation the water filter.
At normal pressure, the water filter door will not break.
Water inlet tube
The next step is to guarantee that the water inlet tube does not freeze.
Because the water line is located behind the ice maker, removing the ice bin and maker is frequently required.
The disturbance in water inlet valve can affect the performance of water filter which may result in door broken.
The waterline can be unfrozen at home using warm water or air.
However, there is always the possibility of a mishap when using the equipment without much skill.
As a result, it’s preferable to leave it to a professional who has the necessary instruments.
The assistance of a technician will effectively resolve the issue.
Proper Installation
Every refrigerator should be able to stand flat and sturdy on a firm surface without collapsing or colliding with the wall or other items.
If a person hears rattling noises, check the inside equipment; it’s likely that the cans, bottles, or other containers are touching each other and causing the pressure on filter.
As a result, proper installation is required for the water filter to function properly.
Consult the user manual for specific model for the proper position.
Inspect water supply
When inspecting the water supply line, ensure that it is properly connected to a cold water source and that the water shutdown valve is fully open.
Next, make sure there are no kinks in the water supply line.
A bend in the line might create obstacles for the flow of water.
Straighten the water supply line to restore proper flow and pressure so that door can bear that pressure.
To avoid a pinched water line, don’t push the refrigerator too far back against the wall or cabinet.
Replacement of water filter
It is necessary to periodically check the water filter operations to avoid any problem later on.
It is advisable to replace water filter after four or six months so that there would not be any pressure on water filter and door remain safe.
In case of door broken, it is better to replace the whole housing because replacing a single part will affect the performance of filter and it may also not be able to work smoothly.
Thus replacement of housing is always a good option in case of broken door.
Whirlpool Refrigerator Water Filter Door Keeps Popping Open?
Water filters remove impurities from water which includes bacteria and sediment resulting in better quality of water thus vital for good health.
There are various reasons that water filter door keeps popping open.
Some of the reasons include high water pressure, botched installation, internal damage, and wrong replacement parts.
High Water Pressure
If water pressure is too high, then water filters may not be designed to withstand such forces, therefore the door cannot resist the pressure, hence it keeps popping open.
To check the limits of water, there is a valve under the sink that regulate the water pressure.
Seek professional assistance to control the water pressure effectively.
Botched installation
There are chances that the water filter door is installed in an improper way.
Since behind the water filter door, a number of parts are there which must be locked.
If improper installed, then adhesion of these parts will not be done completely and hence the door keeps popping open.
It is essential to install water filter doors properly.
Proper positioning and pressing down is what one needs in such critical conditions.
The technician help is always a better option if one cannot do it on its own.
Water Filter Housing
It is better to replace the water filter housing once the water filter door is broken.
Since the water filter door once broke, it is better to replace the whole housing to save time and for smooth operation of the refrigerator
Whirlpool Refrigerator Water Filter Door Replacement
Following are the steps that must be considered in replacing the water filter door.
1.Unplug the power. Turn off the water supply as well.
Pull the refrigerator away from wall to make it accessible to the rear side of the refrigerator.
2. Open the doors along with water filter cover. Pull the toe kick plate free.
Remove the water filter from the housing.
3. Unthreading the mounted screws that houses the water filter housing using screw driver.
Use a nut driver to unthread the screw to release the water inlet line coupler from the lower rear access panel.
4. Unthread all of the screws to release the access panel.
Unthread all the screws securing the water inlet valve bracket top the frame.
5. With the valve bracket detached, it is easy to pull the water filter housing forward to reach the water supply lines.
6. Use a small flat head screwdriver to remove the locking clips securing the supply lines.
By using wrench, to help depress the retaining rings to release the supply lines from the housing.
7. Install the new water filter housing by inserting the water supply lines into the appropriate ports until they are fully seated.
8. Insert the locking clips to secure. Confirm that block is in position, then positioned the new housing.
Aligned the water inlet valve bracket on frame and secure it with mounting screws.
9. Reinstall the access panel. Make ensure that water inlet line coupler is secured to the panel.
Thread the mounting screws to secure the new filter housing.
10. Open the new filter housing cover and install the water filter.
Reinstall the toe kick plate by aligning the clips on the plate with the brackets attached to the refrigerator frame. Then snap the plate into place.
11. Close the water filter cover. Turn the water supply back on.
12. Plug the power cord back in.
It must be ready for use now.
Sources:
https://www.whirlpool.com/blog/kitchen/how-to-replace-refrigerator-water-filters.html
Related Articles: